hi all, I have a 2010, zx14. Due to me having an offset sprocket I need to lengthen my carrier studs by about 1/4 "

My question is .....on the sprocket carrier , are the studs going into the carrier 1.5mm pitch and on the outside 1.25mm pitch.

nick

This ia a pic of my CZ studs. Same pitch on the OEM studs. 1.25/mm that goes with the OEM sprocket nuts. Now, what the pitch is to screw into the wheel, I could not tell you.

* Last updated by: Rook on 12/10/2013 @ 10:12 PM *

Thanks Rook, I have found out that the rest of the threads going into the carrier are 1.5mm pitch and around 30mm, So all is good now

nick

* Last updated by: nick14 on 12/11/2013 @ 8:35 AM *