Yoshimura R-77 Stainless/Titanium Full Exhaust System for 2008 Kawasaki ZX-14, $550 shipped. Includes Power Commander III fuel injection module for 2008 ZX-14. Link for more info on exhaust system: http://www.yoshimura-rd.com/ps-3628-1295-r-77-stainlesstitanium-full-system.aspx

Manufacturer part number for the exhaust system is 1426007; Power Commander is 234-411.
Note that the exhaust system will fit model years 2006-2009, but the Power Commander is specific to the 2008 model year (as near as I can tell). I've been running this system on my bike since the 1900 mile mark. It now has 3350 miles, for a total of 1450 miles. Trading in my ZX-14 for another bike (gasp!), so I pulled the exhaust system off before trading it in. System is in new condition as shown by the images at the links given below; no marks, scratches, dents, dings, etc. This system will drop close to 30 lbs from your bike's weight while making it breathe freer and run cooler (no catalytic converters).

$550 for all including shipping by FedEx ground anywhere in the lower 48. Thanks for looking!

Links to pictures of actual exhaust system below.

Pics on bike:
http://i43.tinypic.com/2jfac9j.jpg
http://i43.tinypic.com/2eq9xrd.jpg
http://i40.tinypic.com/5n6wck.jpg
http://i43.tinypic.com/o8xog6.jpg

Pics of full system off bike:
http://i43.tinypic.com/kb3bk1.jpg
http://i40.tinypic.com/2csfp1j.jpg
http://i41.tinypic.com/1jiog.jpg
http://i43.tinypic.com/zsjr0i.jpg

Pics of muffler:
http://i44.tinypic.com/211jes6.jpg
http://i42.tinypic.com/1ryzck.jpg

Pics of header:
http://i42.tinypic.com/a9re51.jpg
http://i41.tinypic.com/jq3i47.jpg

Pics of Power Commander, etc.:
http://i40.tinypic.com/huhttj.jpg
http://i43.tinypic.com/21ccton.jpg

Assist

Pics on bike:




Pics of full system off bike:




Pics of muffler:


Pics of header:


Pics of Power Commander, etc.:

I may be interested... need full exhaust. Can you hold it for me please? I'll let you know by end of today.

Hmm why is pterodon not in the list of people I can PM, under letter P? o.O

Hmm why is pterodon not in the list of people I can PM, under letter P? o.O

Only those who have enabled private messages appear on that dropdown list. He probably has not done that yet. -bg

bgordon: Correct, I had not yet enabled private messaging. Just fixed that, thanks.

AlexTheNewb: Thanks for the assist. Wasn't sure if posting that many pics directly to the board was kosher or not. Appreciate the help. And yes I can hold off for a bit until you make a decision. Thanks. You should be able to PM me now if you wish.

this work on an 06??? if so will the pcIII too??? if so consider it sold and call me with how you want
it paid for??? 913 620 2518 names JON. thats if nobodys ahead of me?? 550 shipped to kcks,get in touch with me asap...
thanks

PTERODON just checked googled the r-77 and from all I can find it fits....call me 913 620 2518.Ill TAKE IT!!!!!!

Thanks for holding bro, it's a good pipe but I don't think it's the one for me. Go ahead and sell it to jon if you'd like.

Jon -

The pipe definitely fits an '06, but I'm not sure about the PCIII. The Dynojet web site appears to indicate that an '06 and an '08 take different part numbers. If it's a deal breaker for you it might be worth checking with the Dynojet folks (1-800-992-4993) first. Let me know how you'd like to proceed...

I noticed no reply yet so let me get in on it. I have an '08 and I'd like to buy the system. I have Muzzy slip ons but I'm having heat problems. Getting rid of the last catalytic converter makes sense, even If I take a loss on the Muzzys. Let me know how it turns out.
Sharkey

* Last updated by: Sharkey on 6/29/2009 @ 6:48 PM *

SORRY FOR THE DELAY!!!! OVERTIME held me up,my apologies...Im not worried about the pcIII,I really need a header. can I work something out with the power commander later on,or am I going to HAVE to have the pcIII ???? thanks alex

* Last updated by: jon on 6/29/2009 @ 7:16 PM *

just call me 913 620 2518...Ill buy it!!!! its a nice pipe. anytime before 10 or tomarrow. leave a mess. you dont catch me. what are you tradin in the zx for???

Jon -
No problem...I understand about the overtime. Did a little today myself. Good thing about it, though, is it makes for spending money for things like exhaust systems!

As you can see above, Sharkey is also interested so I hope things stay cool if I have to choose one. You were in line first so I'll give you first right of refusal. I'll PM my payment info and we'll go from there. Thanks.

Sharkey-
Hope you're cool with this, man. If things don't work out I'll let you know.

PTERODON,
THANKS !! Hope sharkeys cool with this too????

I can deal with it. Actually I have a PCIII from an '06 model which I'd trade for the '08 model. I wasn't sure about it so I never installed it yet. I got it from Doggo who took it off his '06 to upgrade to a PCV.
This might help facilitate the sale.

SHARKEY,
sounds good to me...moneys on the way,pterodon...let me know how you wanna handle this trade sharkey???
If I seem to disappear for a day,got tied up with something and shall return asap.anyhow,Im gonna need that pcIII for an 06.

Sold - thanks Jon! Thanks to Sharkey as well for being understanding. I hope that you guys can work out a trade for the PCIII in which case everyone wins. Over and out...

thanks alex and sharkey for lettin me slip back in after being tardy.Sharkey Im all for the trade. I was gonna try to sell or trade locally,but let me know how you wanna do this???