Didn't see that this had been done before, thought I'd contribute something to the forum...
Remove the tail fairings (see Fairings Removal Sticky)
Here are the screws...
Remove screws (3) holding tail light in place...1 top, 2 on sides. A long thin Phillips will fit through the subframe. I removed the bolts in the way for easier access...
Pull the tail light straight out, cannabalize the rubber grommet from the OEM if your aftermarket one doesn't come with one (mine didn't).
When putting on the new light, I used a bead of black silicone to seal the gap between the light and the undertail tray (the OEM light uses a strip of foam).
Finished product with black silicone...
Hope this helps!
* Last updated by: runr2940 on 9/8/2012 @ 7:21 PM *