Move Close
Welcome to zx14ninjaform.com!

You are not logged in.
New Topic Reply
Next Page

Page: 1

Previous Page

Thread: Punctured Pulser Cover

Created on: 10/10/21 11:18 AM

Replies: 4

ZTMiller


ZTMiller's Gravatar

Joined: 10/10/21

Posts: 7

Punctured Pulser Cover
10/10/21 11:18 AM

I had a recent experience where I dumped my 2011 zx14. I was out for a ride west of Houston, going through Fayetteville. I decided to go down a side street to turnaround and take a different route. Going about 5 mph I took a right at the first intersection on what looked like asphalt, but was really 1/8 inch black gravel on top of asphalt, why they chose this particular road cover is beyond me. As I made the turn the front tire washed out from underneath me and I face planted. After gathering myself, I got up and then managed to pick the bike up. As i started to assess the damage I realized oil was pouring out of the right side. A piece of gravel punctured the pulser cover through the plastic. I made it to a service station where I ran into a guy who owned a motorcycle shop, he helped me fix the pulser cover with JB weld and put in two quarts of oil and managed to make it home. Really bummed, I was shocked how easily the cover was damaged. Anyone else have these issues on a low speed right-side drop?

Link | Top | Bottom

Rook


Rook's Gravatar

Joined: 03/28/09

Posts: 20589

RE: Punctured Pulser Cover
10/10/21 5:02 PM

I'd say any speed, that thing is likely to break. It might only get cosmetic damage in a 0 mph tip over but if you're moving there's a lot of weight on a small surface plus the force of the crash. You can pick a used cover up cheap off of Ebay.


* Last updated by: Rook on 10/10/2021 @ 5:03 PM *



'08 MIDNIGHT SAPPHIRE BLUE Now Deceased

Link | Top | Bottom

ZTMiller


ZTMiller's Gravatar

Joined: 10/10/21

Posts: 7

RE: Punctured Pulser Cover
10/11/21 11:07 AM


Here is the hole, you can see the awesome gravel.


* Last updated by: ZTMiller on 10/11/2021 @ 11:08 AM *

Link | Top | Bottom

ZTMiller


ZTMiller's Gravatar

Joined: 10/10/21

Posts: 7

RE: Punctured Pulser Cover
10/11/21 11:10 AM


Overall damage.

Link | Top | Bottom

MattSin97



Joined: 11/22/22

Posts: 13

RE: Punctured Pulser Cover
01/20/23 10:57 AM

I dropped my ZX and punctured the Pulsar cover as well. I also put JB Weld on it and it lasted thousands of miles lol. I fixed it now, but the JB Weld probably would have held up forever.

Link | Top | Bottom


Welcome to zx14ninjaform.com!
 
New Topic Reply
Next Page

Page: 1

Previous Page

New Post

Please login to post a response.